Tag: Engineering

Preparing an outline will help you organize your ideas, make sure your message is clear, and will help you when writing subsequent drafts. In this task, you must prepare a rough working outline for your Business Case. Be sure to include enough detail that someone unfamiliar with your document can
understand its purpose and how your ideas will flow. You will be assessed on the content (supporting information) and the organization (sections and flow of ideas) of your document

https://www.nrcan.gc.ca/sites/www.nrcan.gc.ca/files/emmc/pdf/major_projects_access_e.pdf
(This is an outline so you do not need to answer all the questions on attached pdf file)

Hello,
I need someone who is experienced in using COMSOL software to help me with this assignment and the report. I have attached everything in the Bottom. You have to have COMSOL installed with your license in your Laptop to do this assignment.

Motion sickness is a common ailment afflicting travelers. A transdermal patch is available on the market which prevents motion sickness. The small circular patch is applied to the hairless area behind the ear and it gradually delivers the drug scopolamine over a three-day period. A schematic of the patch is shown in the figure. The objective is to model the diffusion of scopolamine through the patch into the skin and look at the efficacy of the patch.
The patch is circular in shape and we can use axisymmetric assumption to formulate the problem. We will consider the computational domain in the skin to a symmetric region around the patch so that the problem remains axisymmetric. The patch consists of three layers: drug reservoir, microporous membrane, and adhesive layers. Dimensions are given in the figure. The Governing equation for this problem is
∂c  1 ∂  ∂c  ∂ 2 c  = D  r  ∂t   r ∂r  ∂r  ∂z 2  
where c is the concentration of drug scopolamine. Diffusivity of the drug scopolamine in different layers of the patch and the skin are given in table below. Note the molar mass of scopolamine is 303 g/mol. You need to convert it to mol/m 3 for data entry to COMSOL.
Steps:
1. Run the problem for 72 hours,
2. Perform a mesh convergence analysis
3. Plot the concentration profile in the domain after 72 hours
4. Change the diffusivity in the micro-porous membrane to 1 x 10 -8 cm2 /sec and solve the problem again.
Compare the concentration profile obtained with the new diffusivity and discuss the differences.
Diffusivity
cm2 /sec
Reservoir
1 x 10-7
Microporous membrane
1 x 10-10
Adhesive
1 x 10-7
Epidermis
1.45 x 10-9
Dermis
5.8 x 10-7
Initial Drug concentration
mg/mm3
Reservoir
0.08
Microporous membrane
0
Adhesive
0.04

I am looking for an excellent
writer to write a literature review for civil engineering articles.
The instruction for the document
needed is:
– writing a total of two pages.
– include the third page for the references.
– please check for plagiarism
before submitting the work.
– write the paper in academic
words.
– cover all the information in
the paper.
– include an in-text citation.

Please read the attached Writing Assignment Instructions File for all the instructions. Kindly follow all the instructions written in the Writing Assignment Instructions File and pick Gig Economy Technologies in United States as your topic. Do not miss any important points from the attached Writing Assignment File.

I am also attaching the grading rubric, reference format and the structure for the whole essay. Kindly go through them as well and follow all these instructions carefully. Thank you.

Also,

Use this following method to write the introduction of the essay:
Introductions Using the Problem Statement Model
1. Status Quo (Background): What all readers can agree upon regarding the topic.
2. Destabilizing Moment or Condition: The problem with the status quo. This part introduces a question or problem related to the topic that needs attention. This is the place where you show the difference between what IS (the status quo) and what should or can be.
3. Questions/Consequences: What makes the problem or question relevant to readers; this helps readers to understand the costs of not addressing the problem.
(Note that sometimes this section can be implied in the introduction and explored in more detail in subsequent paragraphs.)
4. Solution: A proposed or actual solution to the issues introduced by the problem statement.

I am also attaching the grading rubric, reference format and the structure for the whole essay. Kindly go through them as well and follow all these instructions carefully. Thank you.

Please write a minimum of 8 pages of research Cover page Table of content References. You may include a max of 3 images per report. Max spacing = 1.5, and maximum font size = 12. Please include your professional opinion.
Topic: Connected Vehicle Technology

Please let me know if you have any questions
no plagiarism

F‌‍‍‍‌‍‍‍‍‍‌‍‌‍‍‍‍‌‌‌or this paper I need to develop a safety program for a biotech or medical device company to protect employees that
handle animal or cadaver tissue, and any other biohazard Safety Program Paper -You are to write a 4 to 5 page
essay over the development of a safety program. Most of you are, or will be, working in industry of some form. Each
of these areas need safety programs. What I want you to do is to research what type of safety program your area
utilizes and develop one for your use where you currently work or where you anticipate working. When I say industrial
areas I refer to jobs such as teaching technology, construction, construction management, drafting/design,
manufacturing, etc…., but you can also do a safety program in nursing or other professions. Be creative, research
safety programs, and then develop one. Some of you will say, “I already have safety protocols that I want to use!”.
That is okay. You will just need to use them as references. Your challenge is to set those documents up in reference
format, ie… author, date, used where. You may also use your book as a reference. But, I know there are other
resources out in the world wide web that can reinforce the documents that you already have. I also want you to
structure your Safety Program Paper in the following way: Introduction – introduce what type of program you are
going to develop giving any background that needs to be included to inform the reader what to expect. Resources
Used – here is where you are more than likely to include the so‌‍‍‍‌‍‍‍‍‍‌‍‌‍‍‍‍‌‌‌urces that you are going to use to inform the reader
where your program concepts came from. Safety Program – here is where you will include the Safety Program that
you have developed. Conclusion – your conclusion include a reflection of the process of developing the Safety
Program and bring conclusion to your paper As a scholarly essay, the facts and descriptions should come from
scholarly resources and be cited within the text according to the APA rules. Look for reputable sources such as
articles from major universities or associations listed in the text when doing Google searches for information.
Information from Wikipedia are generally not considered scholarly sources and should not be used. At least verify that
their information is accurate in the scholarly community. References must be cited within the text of the paper and
also listed in the references page. The paper should be written from the third person perspective, NOT first person.
This is not a personal reflection essay. There should be no I’s or you’s, etc. Describe the topic from the outside using
your sources as the backbone of your information. The paper should adhere to the following formatting and specific
requirements: Calibri font with 12 pt text size throughout the whole document Double spaced with 1” margins on all
four sides Standard title page No abstract needed In-text citation (formatted according to APA) References page with
a minimum of 5 references (formatted according to APA) ? 4 to 5 pages in length excluding the title p‌‍‍‍‌‍‍‍‍‍‌‍‌‍‍‍‍‌‌‌age and
references page

F‌‍‍‍‌‍‍‍‍‍‌‍‌‍‍‍‍‌‌‌or this paper I need to develop a safety program for a biotech or medical device company to protect employees that
handle animal or cadaver tissue, and any other biohazard Safety Program Paper -You are to write a 4 to 5 page
essay over the development of a safety program. Most of you are, or will be, working in industry of some form. Each
of these areas need safety programs. What I want you to do is to research what type of safety program your area
utilizes and develop one for your use where you currently work or where you anticipate working. When I say industrial
areas I refer to jobs such as teaching technology, construction, construction management, drafting/design,
manufacturing, etc…., but you can also do a safety program in nursing or other professions. Be creative, research
safety programs, and then develop one. Some of you will say, “I already have safety protocols that I want to use!”.
That is okay. You will just need to use them as references. Your challenge is to set those documents up in reference
format, ie… author, date, used where. You may also use your book as a reference. But, I know there are other
resources out in the world wide web that can reinforce the documents that you already have. I also want you to
structure your Safety Program Paper in the following way: Introduction – introduce what type of program you are
going to develop giving any background that needs to be included to inform the reader what to expect. Resources
Used – here is where you are more than likely to include the so‌‍‍‍‌‍‍‍‍‍‌‍‌‍‍‍‍‌‌‌urces that you are going to use to inform the reader
where your program concepts came from. Safety Program – here is where you will include the Safety Program that
you have developed. Conclusion – your conclusion include a reflection of the process of developing the Safety
Program and bring conclusion to your paper As a scholarly essay, the facts and descriptions should come from
scholarly resources and be cited within the text according to the APA rules. Look for reputable sources such as
articles from major universities or associations listed in the text when doing Google searches for information.
Information from Wikipedia are generally not considered scholarly sources and should not be used. At least verify that
their information is accurate in the scholarly community. References must be cited within the text of the paper and
also listed in the references page. The paper should be written from the third person perspective, NOT first person.
This is not a personal reflection essay. There should be no I’s or you’s, etc. Describe the topic from the outside using
your sources as the backbone of your information. The paper should adhere to the following formatting and specific
requirements: Calibri font with 12 pt text size throughout the whole document Double spaced with 1” margins on all
four sides Standard title page No abstract needed In-text citation (formatted according to APA) References page with
a minimum of 5 references (formatted according to APA) ? 4 to 5 pages in length excluding the title p‌‍‍‍‌‍‍‍‍‍‌‍‌‍‍‍‍‌‌‌age and
references page

F‌‍‍‍‌‍‍‍‍‍‌‍‌‍‍‍‍‌‌‌or this paper I need to develop a safety program for a biotech or medical device company to protect employees that
handle animal or cadaver tissue, and any other biohazard Safety Program Paper -You are to write a 4 to 5 page
essay over the development of a safety program. Most of you are, or will be, working in industry of some form. Each
of these areas need safety programs. What I want you to do is to research what type of safety program your area
utilizes and develop one for your use where you currently work or where you anticipate working. When I say industrial
areas I refer to jobs such as teaching technology, construction, construction management, drafting/design,
manufacturing, etc…., but you can also do a safety program in nursing or other professions. Be creative, research
safety programs, and then develop one. Some of you will say, “I already have safety protocols that I want to use!”.
That is okay. You will just need to use them as references. Your challenge is to set those documents up in reference
format, ie… author, date, used where. You may also use your book as a reference. But, I know there are other
resources out in the world wide web that can reinforce the documents that you already have. I also want you to
structure your Safety Program Paper in the following way: Introduction – introduce what type of program you are
going to develop giving any background that needs to be included to inform the reader what to expect. Resources
Used – here is where you are more than likely to include the so‌‍‍‍‌‍‍‍‍‍‌‍‌‍‍‍‍‌‌‌urces that you are going to use to inform the reader
where your program concepts came from. Safety Program – here is where you will include the Safety Program that
you have developed. Conclusion – your conclusion include a reflection of the process of developing the Safety
Program and bring conclusion to your paper As a scholarly essay, the facts and descriptions should come from
scholarly resources and be cited within the text according to the APA rules. Look for reputable sources such as
articles from major universities or associations listed in the text when doing Google searches for information.
Information from Wikipedia are generally not considered scholarly sources and should not be used. At least verify that
their information is accurate in the scholarly community. References must be cited within the text of the paper and
also listed in the references page. The paper should be written from the third person perspective, NOT first person.
This is not a personal reflection essay. There should be no I’s or you’s, etc. Describe the topic from the outside using
your sources as the backbone of your information. The paper should adhere to the following formatting and specific
requirements: Calibri font with 12 pt text size throughout the whole document Double spaced with 1” margins on all
four sides Standard title page No abstract needed In-text citation (formatted according to APA) References page with
a minimum of 5 references (formatted according to APA) ? 4 to 5 pages in length excluding the title p‌‍‍‍‌‍‍‍‍‍‌‍‌‍‍‍‍‌‌‌age and
references page

Key words: Smart cities, smart roads, underground space, sustainability, climate change, energy efficiency, zero carbon footprint, adaptation, environment, BREEAM

Harvard Style, At least 30 sources
​Table of Contents must include the following:
1.Introduction
2.Background
3. Aim and Objectives of the Research
4. Research Question
5. Research Rationale and Significance
6. Literature Review
7. Research Methodology
8. Reference

2.2.2 Gravity Model – Hinterland Division
Use the gravity model applied to Gulf of Guinea hinterland to analyze the flow of goods between locations.
It is positively related to their size (or income levels) and negatively related to the distance between them, after controlling for factors that may affect trade.

This report shall be divided into 3 main section
1- mathematical/analytical explanation of the monte carlo. in this section it is expected to show the mathematical derivation reaching equations and mathematical examples. this should be clear explanation step by step
2- Simulation of monte carlo using excel. in this it is expected to show how to install the add in using excel and explaining step by step using the simulation (monte carlo) with screenshots

3- applications and real examples of monte carlo using the simulation (excel)

Q1/ Read the attached article. Write a 1/2 page summary of the article. Include an additional 1/2 page discussion on your thoughts on the article and how it impacts our analysis of Jet Engines.
Q2/ Derive an equation for propulsive efficiency.
For Q2, please derive the equation step by step with explanation. Thank you

In the 68000 processor in the figure below it has 24 address bits (A0-A23) A0 is embedded inside the processor. We used 15 bits to map for each RAM and ROM each with size (32K × 8bit).
You are asked to configure this design to have the following:
Draw it but using 4 RAM chips each one has 4K×8bit and 2 ROM chips each 8K×8bit.
After that show the memory mapping and the address ranges for RAM

Now that you have understood the realms of electrical engineering and know few examples from each of the five major classification of electrical system, let’s discuss the following topic. It is an introductory topic and you will have opportunity to learn how discussions will be conducted in this course.

Topic: Five 5 major electrical systems in a smart phone

You can use as many sources as you need and it can go over a page no worries at all
Prompt:
Imagine that CSUB is going to build a permanent, on-site library. To honor
the idea of sustainability and natural process, what design features would you
want them to include? Should there be gardens or lots of wood or piped-in
sounds of birds? The wind blows strongly in spring; should wind be used for
energy (or art)? Assume that we need to stay on some kind of budget, but that
within that, the design is up to you. Cite sources and give examples, please.

3. if the transmission substation is under cyber-attack, what are the potential impacts/ damages to the substation and power grid for an IEC 61850 network ?
Please don’t introduction. Just only answer question.
I have the answer bottom, Based on that, please help me analyze it and write 2 paragraphs, first paragraph Cyber attacks against power grids, second paragraph Cyber attacks against SCADA
Cyber attacks against power grids :
➢ Loss of load
➢ Voltage and rotor angle instability
➢ Equipment damage: excessive torques can physically damage generators

➢ Simultaneous multiple generator and line contingencies
➢ Cascades of tripping events
➢ Partial or a complete blackout
Cyber attacks against SCADA:

➢ Increase grid vulnerability to a blackout
And I have the pdf, base on that pdf please help me do it

3. if the transmission substation is under cyber-attack, what are the potential impacts/ damages to the substation and power grid for an IEC 61850 network ?
Please don’t introduction. Just only answer question.
I have the answer bottom, Based on that, please help me analyze it and write 2 paragraphs, first paragraph Cyber attacks against power grids, second paragraph Cyber attacks against SCADA
Cyber attacks against power grids :
➢ Loss of load
➢ Voltage and rotor angle instability
➢ Equipment damage: excessive torques can physically damage generators

➢ Simultaneous multiple generator and line contingencies
➢ Cascades of tripping events
➢ Partial or a complete blackout
Cyber attacks against SCADA:

➢ Increase grid vulnerability to a blackout
And I have the pdf, base on that pdf please help me do it

You are going to work on two functions. In the first function you need to generate n-grams based on the value of n given by the user. In the second function, you need to send the word or words sequence to the function and your function should predict and return the next word with high frequency of occurances.
Q1: Please complete the function get_Ngrams. This function will take the text and the value of n and will return the n-grams based on that.
Q2: Your task here is to complete the function predictNextWord, that will take the text and the words sequence. Your function should predict the next word in the words sequence with the highest frequency.

3. if the transmission substation is under cyber-attack, what are the potential impacts/ damages to the substation and power grid for an IEC 61850 network ?
Just only answer question 3. Please don’t introduce. I have the answer bottom, Based on that, please help me analyze it and write 2 paragraphs, first paragraph Cyber attacks against power grids, second paragraph Cyber attacks against SCADA
Cyber attacks against power grids :
➢ Loss of load
➢ Voltage and rotor angle instability
➢ Equipment damage: excessive torques can physically damage generators

➢ Simultaneous multiple generator and line contingencies
➢ Cascades of tripping events
➢ Partial or a complete blackout
Cyber attacks against SCADA:

➢ Increase grid vulnerability to a blackout
And I have the pdf, base on that pdf please help me do it

The purpose of this lab is to verify that Kirchoff’s Voltage and Current laws are upheld in series and parallel simulated circuits. We will be creating a series, parallel and series-parallel resistive circuits with a DC source and placing meters to measure current and voltage. If you need a refresher on how to use Multisim Live, feel free to re-watch the tutorial video in Module 1.